You are here:
  1. Log into Vera web portal through the following web portal.
  2. Learn the device into your Vera control system using the generic learn process.
    Devices –> Add DeviceName your device something that you will remember.

  3. After the device is learned in, it should appear as a generic Z-wave device and a Temperature sensor (temp sensor may be delayed

  4. Click on the device Ecolink FireFighter

  5. Click on Advanced

  6. Change the following parameters to match the following and press enter:device_json                       :                             D_SmokeSensorWithTamper1.json
    device_file                         :                             D_SmokeSensor1.xml
    category_num                   :                             4
    subcategory_num            :                              4

  7. The device should now show up as a smoke sensor.

  8. While the Co2 is not displayed correctly, a Co2 warning will report as a smoke detection.

Please contact Vera support to add full support of all features.

Was this article helpful?
Dislike 0